| Vickers PVB20-RS-20-CM-11 Piston Pump PVB | f0:12.4; Da max:14 mm; B:5 mm; Brand:NTN; Dynamic load, C:1.76 kN; rs min:0.3 mm; d:4 mm; Mass:0.005 kg; D:16 mm; da min:6 mm; |
| Vickers PVB15-RSY-41-CC12 Piston Pump PVB | C:357.5 mm; Design variant/feature:NNUB.5/W33WI; D1 ≈:890 mm; F:767.5 mm; d:690 mm; B:550 mm; r3,4 min.:7.5 mm; Limiting speed:600 r/min; rb max.:3 mm; Basic dynamic load rating C:9900 kN; |
| Vickers PVB29-RS-20-CMC-11-JA Piston Pump PVB | m:4.7 mm; d:17 mm; G:M6x1; Recommended tightening torque for set screw:5.5 Nm; Weight:0.18 kg; C1:4.4 mm; SW:3 mm; T min.:-20 °C; D:47 mm; B:31 mm; |
| Vickers PVB20RS20C11 Piston Pump PVB | rs min:1 mm; ra max:1 mm; Radial clearance class:CN; Characteristic rolling element frequency, BSF:2.76 Hz; B:12 mm; da max:18.5 mm; Brand:NTN; Static load, C0:4.2 kN; Characteristic inner ring frequency, BPFI:3.97 Hz; Fatigue limit load, Cu:0.19 kN; |
| Vickers PVB29-LS-20-CG-11 Piston Pump PVB | Recommended tightening torque for set screw:3.7 Nm; G:1/4-28UNF; d1:27.2 mm; D:40 mm; B1:28.6 mm; T min.:-20 °C; C:12 mm; S:6.5 mm; C1:3.6 mm; d:12.7 mm; |
| Vickers PVB29RSY41C12 Piston Pump PVB | Z:39.6 mm; Designation of closed end cover:SCC205; N:16mm; A:27 mm; C0:7.88 kN; B:27 mm; H:130 mm; L:68 mm; d:25.4 mm; Recommended tightening torque for set screw:3.7 Nm; |
| Vickers PVB15-LSY-21-C-11 Piston Pump PVB | L:119 mm; N1:14 mm; H:27 mm; J:88.5 mm; s1:11 mm; T max.:200 °C; C:9.55 kN; Designation of bearing:US203G2T20; H2:54 mm; G:M6x1; |
| Vickers PVB20-RS-20-CC-11 Piston Pump PVB | Weight:0.88 kg; C0:15.2 kN; A:28 mm; B:42.9 mm; s1:21.45 mm; C:25.7 kN; A3:2 mm; SW:3.97 mm; Recommended tightening torque for set screw:8 Nm; d:34.92 mm; |
| Vickers PFB20-L-10-PRC Piston Pump PVB | d3 max.:190.627 mm; G:159.614 mm; B:26.441 mm; B1:94.005 mm; Lock washer:W 032; Lock nut:N 032; Mass adapter sleeve assembly:5.45 kg; B4:29.362 mm; d:160 mm; Sleeve:S 3032x5.7/16; |
| Vickers PVB15-RS-20-CC-11-PRC Piston Pump PVB | Category:Single Row Ball Bear; Snap Ring:No; Other Features:Deep Groove; Harmonized Tariff Code:8482.10.50.68; Rolling Element:Ball Bearing; Inner Race Width:0 Inch | 0 Millimete; Outside Diameter:1.85 Inch | 47 Milli; Weight / Kilogram:0.049; Internal Clearance:C4-Extra Loose; Fatigue limit load, Cu:0.23 kN; |