| No. | Brand | r | a | J | D | A | H | G | e |
| HPC-200 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| VLRE-7-1/2 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| HPCA-40 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| HPC-52 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| PLRY-2-1/2 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| PLRNE-1-1/2 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| PLRE-2-3/4 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| PLRUE-2 | OSBORN LOAD RUNNERS | - | - | - | 1.4960 in | 0.1970 in | - | - | - |
| PLR-6 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| PCR-7/8 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| FLRY-2 | OSBORN LOAD RUNNERS | - | - | - | - | 65 mm | 79.4 mm | - | - |
| PLRUE-1-1/8 | OSBORN LOAD RUNNERS | - | - | - | 170 mm | - | - | - | - |
| PLRE-3-1/2 | OSBORN LOAD RUNNERS | - | - | 146 mm | - | 54 mm | 54 mm | - | - |
| FLRS-1 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| PLRE-1-1/8 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| HPVA-250 | OSBORN LOAD RUNNERS | - | - | - | - | - | 112.5 mm | - | - |
| PLRS-2 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| VLRE-3-1/2-4 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| PLRU-2-1/2 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| PLR-3-1/4 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| FLRY-2-1/2-7 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| PLRS-1 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| PCR-3/4 | OSBORN LOAD RUNNERS | 1 | - | - | 80 mm | - | - | - | - |
| PLRU-2-3/4 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| PLRNE-2-1/2 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| FFLR-2-1/2-4 | OSBORN LOAD RUNNERS | - | - | - | - | 38 mm | 33.3 mm | - | - |
| PLRE-6 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| HPJE-40-1 | OSBORN LOAD RUNNERS | - | - | 111 mm | - | - | - | - | 28 mm |
| FLR-4M | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| HPCA-250 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| OSBORN LOAD RUNNERS PCR-3/4 Cam Follower and Track Roller - Stud Type | r:1; B:49.2 mm; C:21 mm; C0:19.3 kN; Recommended tightening torque for set screw:8.3 Nm; D:80 mm; C1:6.2 mm; T max.:100 °C; Weight:0.63 kg; T min.:-20 °C; |
| OSBORN LOAD RUNNERS FLR-1-1/2-2 Cam Follower and Track Roller - Stud Type | Recommended tightening torque for set screw:16.8 Nm; B:68.2 mm; SW:4.76 mm; d1:96.8 mm; B2:23.5 mm; T max.:200 °C; Weight:2.62 kg; C0:45 kN; r:2; T min.:-20 °C; |
| OSBORN LOAD RUNNERS VLRE-7-1/2 Cam Follower and Track Roller - Stud Type | Pre Install Clearance Min:0.0063 in; C - Dynamic Load (Basic):194000 lb; Eng Internal Radial Clearance - Min:0.0063; Locking Style:Single V-Lock; Dimension H:1.50 in; Y2 - Geometry Factor:3.89; Pre Install Clearance Max:0.0079 in; Oil Lubrication - M/N Seal:650 rpm; e - Geometry Factor:0.26; Dimension N:5.450 in; |
| OSBORN LOAD RUNNERS NCF-1-1/4-SB Cam Follower and Track Roller - Stud Type | Type:Bearings with Housin; Width T(mm):30; Flange Shape:Round Type; RoHS:6; Volume Discount:Available; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Bearing Part Number:6704; |
| OSBORN LOAD RUNNERS CLRY-7 Cam Follower and Track Roller - Yoke Type | Symbol of Bearing Ring Shape:No; Internal Symbol:No; Outer Ring:With Outer Ring; Symbols of Lubrication Amount:S; Special Configurations Code:S5; Rolling Element Material:Steel; Retainer Type:Punching; Precision Grade Symbol:No; Low Torque Specification:No; Days to Ship:8 Days; |
| OSBORN LOAD RUNNERS HPCE-125 Cam Follower and Track Roller - Stud Type | Number of lubrication holes:0; Characteristic rolling element frequency, BSF:5.95 Hz; da min:99 mm; Nlim:4,600 rpm; Y2:4.46; D:180 mm; Max operating temperature, Tmax:200 °C; d:85 mm; Y0:2.93; Fatigue limit load, Cu:44.7 kN; |
| OSBORN LOAD RUNNERS PLRU-2-1/2 Cam Follower and Track Roller - Stud Type | Oil Lubrication - T Seal:1700 rpm; Y2 - Geometry Factor:4.06; Pre Install Clearance Min:0.0053 in; Dimension A:4.25 in; Dimension H:1.40 in; Dimension F:14.88 in; Float:0.083 in; Grease Lubrication - B/C/O Seal:600 rpm; Dimension SVV:5.13 in; Dimension J (Bolt Size):0.750 in; |
| OSBORN LOAD RUNNERS FLRC-2-1/2 Cam Follower and Track Roller - Stud Type | Da - Cup Frontface Backing Diameter:2.60 in; Cup Part Number:14282; r - Cup Backface To Clear Radius1:0.06 in; D:2.8345 in; Cg - Geometry Factor:0.0668; Db - Cup Backface Backing Diameter:2.44 in; C - Cup Width:0.5918 in; Series:14000; e - ISO Factor2:0.38; Y - ISO Factor3:1.57; |
| OSBORN LOAD RUNNERS FLRE-3-1/2 Cam Follower and Track Roller - Stud Type | Unit, Type:Insert Bearing Unit; Type of Insert Bearing:Cylindrical Bore Sha; Surface Treatment:No; Days to Ship:10 Days; Unit Body Material:Cast iron made; Basic Load Rating Cr(KN):25.9; Pillow Type, Category:Standard; Flange dimensions a(mm):161; Shaft Dia. (mm)(φ):35; |
| OSBORN LOAD RUNNERS HPJ-40-1 Cam Follower and Track Roller - Stud Type | e - ISO Factor8:0.6; Ab - Cage-Cone Frontface Clearance:3 mm; K - Factor7:0.97; d:28.575 mm; r - Cup Backface To Clear Radius2:1.52 mm; Design Units:Imperial; Y - ISO Factor9:1; Cone Part Number:41126; a - Effective Center Location3:-4.1 mm; B - Cone Width:24.257 mm; |
OSBORN LOAD RUNNERS FLR-1-3/4 Cam Follower and Track Roller - Stud Type Video
Osborn FLR-1-3/4 Load Runner, Flanged, Concentric Stud ...
Osborn FLR-1-3/4 Load Runner, Flanged, Concentric Stud, 1.75" Roller Diameter, 1.19" Roller Width, 0.75" Stud Diameter, 1.75" Stud Length, Ball Bearings, ...Bearing Type: Ball BearingsMaterial: Alloy SteelItem Weight: 1.00 poundsMeasurement System: Inch
18023 Osborn revise for CD.qxd - A H R International
... Runners idler-rollers with high-strength-steel Load Rails, cut to length and con- ... formance of Osborn's Load Runners® idler-rollers. ... FLR-1 3/4.58 pages
IDLER ROLLER & RAIL SOLUTIONS - Osborn
Osborn designed the world's first non-needle roller bearing idler roller more than ... Today, Load Runners is the world's leading idler-roller ... FLR-1-3/4.92 pages
Flanged Cam Followers - Motion
Results 1 - 12 of 544 — Osborn Load Runners FLR-1-1/2. Flanged Cam Follower - 1.5000 in Roller ... McGill FCF 1 3/4. Flanged Cam Follower - 1.7500 in Roller ...
FLR-1-3/4 | Load Runner®; Standard Stud; Flanged (Sealed)
Specifications ; Roller Dia. 1 3/4 in ; Stud Dia. 0.75 in ; Stud Type, Standard ; Flange Thickness, 0.343 in ; Stud Diameter Tolerance [Min], 0.749 in.
Osborn 0009547200 FLR-1 3/4 LOAD RUNNER - MRO Supply
Osborn 0009547200 FLR-1 3/4 LOAD RUNNER. View additional description. Typically ships in: 1 day; Weight: 1.0 lb; Unit of measure: each; MOQ : 3.Stud Capacity Shear lbs: 5780 lbsApprox Wt lbs: 1 lbsThrust Capacity Static Limit lbs: 680 lbsRecommended Mounting Hole Tolerance: +0....
Osborn Other Bearing & Bushing Parts for sale | eBay
1 Osborn Plr-1 3/4 Heavy Load Runners Idler Roller Bearing P3. $24.99 New. Osborn FLR-5-20 Flanged 5" Diam. Concentric Load Runner w/Jam Nut & Lock Washer.
FLR-1-3/4 - Cam Follower and Track Roller - Stud Type - BDI
OSBORN LOAD RUNNERS OSBORN LOAD RUNNERS. FLR-1-3/4 · 1-3/4" Roller Diameter; 1-3/16" Roller Width; Flat with Flange Roller Surface; Stud Type; 3/4" Stud Diameter ...
Load Runner catalogue - OSBORN-International - Yumpu
Yoke style Load Runners ® can be mounted with Osborn heavy duty shafts ... FLR-1 3/4 095 472-9907 1,750 1,188 2,438 0,343 0,750 1,750 0,875 3/4-16 1,000 ...