| OSBORN LOAD RUNNERS PLRUE-1-1/8 Cam Follower and Track Roller - Stud Type | Category:Roller Bearings; Characteristic rolling element frequency, BSF:4.84 Hz; Radial clearance class:C3; B:39 mm; Da max:159 mm; r1a max:2 mm; Minimum Buy Quantity:N/A; Characteristic outer ring frequency, BPF0:5.21 Hz; D:170 mm; Mass (without HJ ring):3.88 kg; |
| OSBORN LOAD RUNNERS PLRSE-1-3/4 Cam Follower and Track Roller - Stud Type | Dynamic load, C:120 kN; ra max:1.5 mm; Max operating temperature, Tmax:120 °C; Min operating temperature, Tmin:-40 °C; Minimum Buy Quantity:N/A; rs min:1.5 mm; Static load, C0:149 kN; Category:Bearings; r1s min:1.5 mm; D:120 mm; |
| OSBORN LOAD RUNNERS FLRE-1-1/8 Cam Follower and Track Roller - Stud Type | Type:Lock Nuts; Volume Discount:Available; Days to Ship:6 Days; Material:[Steel] Low Carbon S; RoHS:6; Thread Nominal M(mm):M30×1.5; Screw Type:Metric (Fine) Thread; Shape:Round Shape; |
| OSBORN LOAD RUNNERS FLRE-6 Cam Follower and Track Roller - Stud Type | Aa - Cage-Cone Backface Clearance:0.01 in; Y1 - ISO Factor9:2.19; Cg - Geometry Factor12:0.108; Series:L116100; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2770 lbf; r - Cup Frontface To Clear Radius2:0.03 in; G2 - Heat Generation Factor (Rib-Roller End):64.3; C - Double Cup Width:1.5626 in; G1 - Heat Generation Factor (Roller-Raceway)11:97.2; K - Factor7:1.9; |
| OSBORN LOAD RUNNERS HPJ-40-1 Cam Follower and Track Roller - Stud Type | e - ISO Factor8:0.6; Ab - Cage-Cone Frontface Clearance:3 mm; K - Factor7:0.97; d:28.575 mm; r - Cup Backface To Clear Radius2:1.52 mm; Design Units:Imperial; Y - ISO Factor9:1; Cone Part Number:41126; a - Effective Center Location3:-4.1 mm; B - Cone Width:24.257 mm; |
| OSBORN LOAD RUNNERS PLRU-2-3/4 Cam Follower and Track Roller - Stud Type | Diameter series symbol:Used for Light load; Unit, Type:Insert Bearing Unit; Basic Load Rating, Static Rating(N):71500; Basic Load Rating, Dynamic Rating(N):96100; Bearing Inner Dia. Shape:Tapered hole adapter; Unit Body Material:Cast Iron; Stroke:No; Fit:J7; |
| OSBORN LOAD RUNNERS HPJ-72 Cam Follower and Track Roller - Stud Type | do - Ball Diameter:8.73125 mm; R - Inner Ring To Clear Radius2:1.0 mm; Ce - Dynamic Radial Rating1:27900 N; Precision Class:ISO P4 (ABEC 7); Contact Angle:15 º; da - Inner Ring Backing Diameter:56.100 mm; Limiting Speed (Oil):32600 rpm; Bearing Width:16 mm; d:50 mm; Cage Type:CR - Phenolic Outer; |
| OSBORN LOAD RUNNERS FFLR-2-4 Cam Follower and Track Roller - Stud Type | Dimension D Min:9.50 in; Shaft Size Type:Imperial; Dimension SVV:4.18 in; Grease Lubrication - T Seal:2000 rpm; Y2 - Geometry Factor:4.57; Weight:33 lb; Dimension C:4.19 in; Eng Internal Radial Clearance - Min:0.0037; Shaft Size :3 in; Dimension H:1.33 in; |
| OSBORN LOAD RUNNERS HPCE-125 Cam Follower and Track Roller - Stud Type | Number of lubrication holes:0; Characteristic rolling element frequency, BSF:5.95 Hz; da min:99 mm; Nlim:4,600 rpm; Y2:4.46; D:180 mm; Max operating temperature, Tmax:200 °C; d:85 mm; Y0:2.93; Fatigue limit load, Cu:44.7 kN; |
| OSBORN LOAD RUNNERS VLRY-10-1/2 Cam Follower and Track Roller - Yoke Type | Bearing Used:Deep Groove Ball Bea; Shape:T-Shaped; Days to Ship:8 Days; Bearing Part Number:6002; Type:Bearings with Housin; RoHS:6; Bearing Retained:Yes (with retaining; Number of Bearings:Double; Holder Surface Treatment:Black Oxide Coating; |