| OSBORN LOAD RUNNERS PLRS-2 Cam Follower and Track Roller - Stud Type | Characteristic rolling element frequency, BSF:4.07 Hz; Fatigue limit load, Cu:0.11 kN; Characteristic cage frequency, FTF:0.38 Hz; B:8 mm; Mass:0.02 kg; Nlim (grease):26,000 rpm; Dynamic load, C:5.1 kN; da min:14 mm; Min operating temperature, Tmin:-25 °C; Max operating temperature, Tmax:110 °C; |
| OSBORN LOAD RUNNERS PLRU-2-3/4 Cam Follower and Track Roller - Stud Type | Diameter series symbol:Used for Light load; Unit, Type:Insert Bearing Unit; Basic Load Rating, Static Rating(N):71500; Basic Load Rating, Dynamic Rating(N):96100; Bearing Inner Dia. Shape:Tapered hole adapter; Unit Body Material:Cast Iron; Stroke:No; Fit:J7; |
| OSBORN LOAD RUNNERS VLRE-1-1/2 Cam Follower and Track Roller - Stud Type | r - Cup Frontface To Clear Radius2:0.06 in; Aa - Cage-Cone Backface Clearance:0.07 in; Design Units:Imperial; K - Factor7:1.69; Da - Cup Frontface Backing Diameter:4.56 in; T - Bearing Width across Cones:3.1249 in; e - ISO Factor8:0.35; Y1 - ISO Factor9:1.95; G1 - Heat Generation Factor (Roller-Raceway)11:91; Series:555; |
| OSBORN LOAD RUNNERS HPCE-80 Cam Follower and Track Roller - Stud Type | B:42.9 mm; C:25.7 kN; L:274 mm; d:34.92 mm; H2:41 mm; A5:25.4 mm; SW:3.97 mm; Weight:1.93 kg; G:R1/8"; T min.:-20 °C; |
| OSBORN LOAD RUNNERS PLRUE-2 Cam Follower and Track Roller - Stud Type | E:4.409 in; A:0.1970 in; C:5.709 in; Threads No. per Inch:12; Piston Area:6.3 in²; Major Diameter B:2.933 in; Assembly Weight:7.7 lb; Piston Length of Travel:0.197 in; E1:2.992 in; D:1.4960 in; |
| OSBORN LOAD RUNNERS NCFY-1-1/2-S Cam Follower and Track Roller - Yoke Type | Pillow Type, Category:Standard; Seal:Silicone; Diameter series symbol:Used for Light load; Bearing Unit, Type:Pillow Type; Accessory:No Cover; Machining:No; Fit:J7; B:69.8; |
| OSBORN LOAD RUNNERS PLRY-10 Cam Follower and Track Roller - Yoke Type | B:74.6 mm; A:72 mm; S:30.2 mm; N:25mm; Weight:6.66 kg; H1:27 mm; Designation of bearing:UC214-44G2T04; G:M10x1; C0:45 kN; T min.:-40 °C; |
| OSBORN LOAD RUNNERS FLRH-1-1/4 Cam Follower and Track Roller - Stud Type | Recommended tightening torque for set screw:8 Nm; H:120 mm; L:320 mm; A5:30.2 mm; C:31.85 kN; SW:3.97 mm; B:49.2 mm; A:31 mm; s1:24.6 mm; d:44.45 mm; |
| OSBORN LOAD RUNNERS PLR-3-1/4 Cam Follower and Track Roller - Stud Type | Designation of housing:T210N-; A1:16 mm; L1:90 mm; L3:86 mm; N:29mm; T max.:200 °C; d:47.62 mm; Designation of open end cover:SCOU210-30; T min.:-20 °C; A5:32.6 mm; |
| OSBORN LOAD RUNNERS CLRY-1-3/4 Cam Follower and Track Roller - Yoke Type | Adapter sleeve reference:H2306-15; Designation of bearing:UK306G2H-15; A:28 mm; d1:45 mm; Weight:1.3 kg; Designation of housing:C306-; s1:23 mm; B1:38 mm; T min.:-20 °C; A3:2.5 mm; |