| No. | Brand | r | a | J | D | A | H | G | e |
| FLRE-1-1/8 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| HPVA-200 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| HPJ-90 | OSBORN LOAD RUNNERS | - | - | 60 mm | - | 48 mm | - | - | - |
| PCR-7/8 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| FLR-3-1/2 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| FLRY-2 | OSBORN LOAD RUNNERS | - | - | - | - | 65 mm | 79.4 mm | - | - |
| PLRE-2-1/2-7 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| NCF-3-SB | OSBORN LOAD RUNNERS | - | - | 170.5 mm | - | 60 mm | - | - | - |
| PLRUE-1-1/8 | OSBORN LOAD RUNNERS | - | - | - | 170 mm | - | - | - | - |
| HPJA-50 | OSBORN LOAD RUNNERS | - | - | - | - | - | 69.8 mm | - | - |
| PLRS-1 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| PLRUE-1-1/2 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| HPVE-125 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| FLR-4-1/2 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| PLRE-1-1/8 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| PLRE-2-3/4 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| FLRS-2-1/2 | OSBORN LOAD RUNNERS | - | - | - | 55 | - | - | - | - |
| PLRE-4 | OSBORN LOAD RUNNERS | - | - | - | 820 mm | - | - | - | - |
| HPC-35 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| PCR-1-3/8 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| PLRS-2 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| FLR-1-1/2-2 | OSBORN LOAD RUNNERS | 2 | - | - | - | - | - | - | - |
| VLRE-1-1/2 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| FLR-1-1/8 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| PLRY-6 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| OSBORN LOAD RUNNERS HPJ-90 Cam Follower and Track Roller - Stud Type | Dz:70 mm; B:38.1 mm; A:48 mm; J:60 mm; T min.:-40 °C; E:18 mm; C:19.5 kN; H1:17 mm; H2:83 mm; A1:25 mm; |
| OSBORN LOAD RUNNERS HPJA-200 Cam Follower and Track Roller - Yoke Type | Limiting Speed (Oil):28400 rpm; Bearing Weight:0.220 Kg; D:90 mm; R - Inner Ring To Clear Radius2:1.0 mm; Ce - Dynamic Radial Rating1:23600 N; Ball Type:STEEL; Design Units:METRIC; Limiting Speed (Grease):14200 rpm; C0 - Static Radial Rating:21900 N; Contact Angle:15 º; |
| OSBORN LOAD RUNNERS PLRE-5 Cam Follower and Track Roller - Stud Type | D1:108.1 mm; Max operating temperature, Tmax:120 °C; Characteristic rolling element frequency, BSF:9.85 Hz; Precision class:P42; a:33 mm; r1a max:0.6 mm; f0:16.6; d1:96.9 mm; da min:92 mm; D6:97.4 mm; |
| OSBORN LOAD RUNNERS FLRE-6 Cam Follower and Track Roller - Stud Type | Aa - Cage-Cone Backface Clearance:0.01 in; Y1 - ISO Factor9:2.19; Cg - Geometry Factor12:0.108; Series:L116100; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2770 lbf; r - Cup Frontface To Clear Radius2:0.03 in; G2 - Heat Generation Factor (Rib-Roller End):64.3; C - Double Cup Width:1.5626 in; G1 - Heat Generation Factor (Roller-Raceway)11:97.2; K - Factor7:1.9; |
| OSBORN LOAD RUNNERS NCFY-1-1/2-S Cam Follower and Track Roller - Yoke Type | Pillow Type, Category:Standard; Seal:Silicone; Diameter series symbol:Used for Light load; Bearing Unit, Type:Pillow Type; Accessory:No Cover; Machining:No; Fit:J7; B:69.8; |
| OSBORN LOAD RUNNERS FLR-1-1/2-2 Cam Follower and Track Roller - Stud Type | Recommended tightening torque for set screw:16.8 Nm; B:68.2 mm; SW:4.76 mm; d1:96.8 mm; B2:23.5 mm; T max.:200 °C; Weight:2.62 kg; C0:45 kN; r:2; T min.:-20 °C; |
| OSBORN LOAD RUNNERS NCF-3-SB Cam Follower and Track Roller - Stud Type | T min.:-20 °C; L:219.5 mm; d:50.8 mm; H1:23.2 mm; Recommended tightening torque for set screw:16.8 Nm; C:43.55 kN; J:170.5 mm; s1:27.8 mm; A:60 mm; Weight:3.57 kg; |
| OSBORN LOAD RUNNERS HPJ-72 Cam Follower and Track Roller - Stud Type | do - Ball Diameter:8.73125 mm; R - Inner Ring To Clear Radius2:1.0 mm; Ce - Dynamic Radial Rating1:27900 N; Precision Class:ISO P4 (ABEC 7); Contact Angle:15 º; da - Inner Ring Backing Diameter:56.100 mm; Limiting Speed (Oil):32600 rpm; Bearing Width:16 mm; d:50 mm; Cage Type:CR - Phenolic Outer; |
| OSBORN LOAD RUNNERS PLRY-10 Cam Follower and Track Roller - Yoke Type | B:74.6 mm; A:72 mm; S:30.2 mm; N:25mm; Weight:6.66 kg; H1:27 mm; Designation of bearing:UC214-44G2T04; G:M10x1; C0:45 kN; T min.:-40 °C; |
| OSBORN LOAD RUNNERS PLR-10 Cam Follower and Track Roller - Stud Type | Bearing Unit, Type:Take-Up Type; Unit Body Material:Cast Iron; Stroke:No; Surface Treatment:No; Diameter series symbol:For Heavy Load; Unit, Type:Insert Bearing Unit; Bearing Inner Dia. Shape:Cylindrical Bore Set; Grease Type:Standard Grease; Seal:Nitrile; |
OSBORN LOAD RUNNERS FLRH-1-1/4 Cam Follower and Track Roller - Stud Type Video