| No. | Brand | r | a | J | D | A | H | G | e |
| CLRY-1-1/2 | OSBORN LOAD RUNNERS | - | - | - | - | 31 mm | 120 mm | R1/8" | - |
| HPC-100 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| HPJ-85 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| PLRE-3-1/2 | OSBORN LOAD RUNNERS | - | - | 146 mm | - | 54 mm | 54 mm | - | - |
| PLRE-1-1/8 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| PLRUE-2 | OSBORN LOAD RUNNERS | - | - | - | 1.4960 in | 0.1970 in | - | - | - |
| NCFY-1-1/2-S | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| HPCE-100 | OSBORN LOAD RUNNERS | - | - | - | - | 43 mm | 219 mm | - | - |
| PLRU-1 | OSBORN LOAD RUNNERS | - | - | 159 mm | - | - | - | M10x1 | - |
| FLRE-3-1/4 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| HPCE-40-1 | OSBORN LOAD RUNNERS | - | - | - | 140 mm | - | - | 7/16-20UNF | - |
| VLRY-7-1/2 | OSBORN LOAD RUNNERS | - | - | 193.7 mm | - | 79.4 mm | 68.3 mm | - | - |
| VLRY-8-1/2 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| PLRS-2 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| FLR-1-1/2-2 | OSBORN LOAD RUNNERS | 2 | - | - | - | - | - | - | - |
| PLRUE-1-1/8 | OSBORN LOAD RUNNERS | - | - | - | 170 mm | - | - | - | - |
| FLRY-1-3/4 | OSBORN LOAD RUNNERS | - | - | - | - | 21 mm | 98 mm | - | - |
| HPVE-100 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | 28 mm |
| FLRE-1-1/4 | OSBORN LOAD RUNNERS | - | - | - | - | 25.5 mm | - | - | 10 mm |
| PLR-6 | OSBORN LOAD RUNNERS | - | - | - | - | - | - | - | - |
| OSBORN LOAD RUNNERS PLRE-5 Cam Follower and Track Roller - Stud Type | D1:108.1 mm; Max operating temperature, Tmax:120 °C; Characteristic rolling element frequency, BSF:9.85 Hz; Precision class:P42; a:33 mm; r1a max:0.6 mm; f0:16.6; d1:96.9 mm; da min:92 mm; D6:97.4 mm; |
| OSBORN LOAD RUNNERS HPC-40 Cam Follower and Track Roller - Stud Type | B:106; Machining:No; Unit Body Material:Cast Iron; Surface Treatment:No; Grease Type:Standard Grease; Accessory:With steel plate cov; Fit:J7; Stroke:No; RoHS:6; |
| OSBORN LOAD RUNNERS HPCE-40-1 Cam Follower and Track Roller - Stud Type | D:140 mm; Weight:3.3 kg; SW:5.56 mm; C:38 mm; d:63.5 mm; B:75 mm; C0:60.5 kN; T max.:100 °C; m:12 mm; G:7/16-20UNF; |
| OSBORN LOAD RUNNERS PCR-7/8 Cam Follower and Track Roller - Stud Type | d:85; Rolling Element Material:Bearing Steel; Days to Ship:8 Days; Machining:No; Bearing Unit, Type:Square flange shape; Seal:Silicone; Fit:J7; Basic Load Rating, Static Rating(N):61900; |
| OSBORN LOAD RUNNERS HPC-35 Cam Follower and Track Roller - Stud Type | Dimension J (Bolt Size):0.625 in; Eng Internal Radial Clearance - Max:0.0037; Y1 - Geometry Factor:3.14; Shaft Size :2-1/2 in; Dimension L:3.40 in; Weight:27 lb; Oil Lubrication - T Seal:2900 rpm; Float:0.083 in; C0 - Static Load:54100 lb; Dimension C:3.7 in; |
| OSBORN LOAD RUNNERS FLRS-2-1/2 Cam Follower and Track Roller - Stud Type | Type:Ball; Bearing Style:Rubber Sealed; Size Standards:Metric System; Seal, Shield Symbols:LLU; RoHS:6; D:55; Retainer Type:Punching; Basic Dynamic Load Rating(N):9550; Inner/Outer Ring Material:Steel; Days to Ship:Same day; |
| OSBORN LOAD RUNNERS HPJA-200 Cam Follower and Track Roller - Yoke Type | Limiting Speed (Oil):28400 rpm; Bearing Weight:0.220 Kg; D:90 mm; R - Inner Ring To Clear Radius2:1.0 mm; Ce - Dynamic Radial Rating1:23600 N; Ball Type:STEEL; Design Units:METRIC; Limiting Speed (Grease):14200 rpm; C0 - Static Radial Rating:21900 N; Contact Angle:15 º; |
| OSBORN LOAD RUNNERS FLR-3 Cam Follower and Track Roller - Stud Type | N1:25 mm; T min.:-20 °C; Weight:3.8 kg; L3:95 mm; A:64 mm; N:35mm; Designation of housing:T211N-; Recommended tightening torque for set screw:16.8 Nm; A5:33.4 mm; Z:26.6 mm; |
| OSBORN LOAD RUNNERS VLRE-3-1/2-4 Cam Follower and Track Roller - Stud Type | e - Geometry Factor:0.23; C0 - Static Load:87200 lb; Pre Install Clearance Max:0.0039 in; Shaft Size :80 mm; Dimension A:0.59 in; Oil Lubrication - M/N Seal:1400 rpm; Float:0.083 in; Dimension B:1.06 in; Dimension C:4.76 in; Eng Internal Radial Clearance - Max:0.0039; |
| OSBORN LOAD RUNNERS CLRY-1-3/4 Cam Follower and Track Roller - Yoke Type | Adapter sleeve reference:H2306-15; Designation of bearing:UK306G2H-15; A:28 mm; d1:45 mm; Weight:1.3 kg; Designation of housing:C306-; s1:23 mm; B1:38 mm; T min.:-20 °C; A3:2.5 mm; |
OSBORN LOAD RUNNERS HPJA-76 Cam Follower and Track Roller - Yoke Type Video