| No. | Brand | d | B | D | Da | da | Type | Noun | Seals |
| 35 0411 01 | Rollix | 1/2 in | - | 7/8 in | - | - | - | - | - |
| 92.50.2644.990.41.1502 | Standard 5 | 2.1875 in | - | - | - | - | - | - | - |
| 121.50.5600.990.41.1502 | Standard 5 | 2.2500 in | 2-9/16 in | 7-13/32 in | - | - | - | - | - |
| 34 0541 01 | Rollix | 1.2500 in | 37.7 mm | 72 mm | - | - | - | - | - |
| 12.40.2950.000.11.1502 | Standard 5 | 28 mm | - | 38 mm | - | - | - | - | - |
| 8 0475 08 | Rollix | 3/4 in | 1 in | 1 in | - | - | - | - | - |
| 12.30.2330.001.41.1503 | Standard 5 | 2.9375 in | 4-7/8 in | 9-3/4 in | - | - | - | - | - |
| 29 0411 01 | Rollix | 1-15/16 in | 5.3125 in | 4.0625 in | - | - | - | - | - |
| 34 0411 01 | Rollix | 1.0000 in | - | - | - | - | - | - | - |
| 161.45.2654.891.41.1503 | Standard 5 | 30 mm | - | 2.4409 in | - | - | - | - | - |
| 191.40.3550.990.41.1502 | Standard 5 | 170 mm | 52 mm | 310 mm | - | - | - | - | - |
| 162.45.2654.890.11.1503 | Standard 5 | 0.6250 in | - | - | - | - | - | - | - |
| 6 0508 | Rollix | 6.8750 in | 3.2500 in | 14.1250 in | - | - | - | - | - |
| 11.35.2620.001.41.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 192.50.3150.990.41.1502 | Standard 5 | - | - | 1.2500 in | - | - | - | - | - |
| 2 0626 01 | Rollix | - | - | - | - | - | - | - | - |
| 11.50.4140.001.49.1502 | Standard 5 | 1.1250 in | - | - | - | - | - | - | - |
| 192.32.2240.990.41.1502 | Standard 5 | 3.5000 in | 3.9200 in | - | - | - | - | - | - |
| 192.50.5600.990.41.1502 | Standard 5 | - | - | 2-1/2 in | - | - | - | - | - |
| 11.40.2795.001.41.1502 | Standard 5 | 1-7/16 in | - | 1-3/4 in | - | - | - | - | - |
| 161.40.2240.891.41.1503 | Standard 5 | 1-3/16 in | - | 5 in | - | - | - | - | - |
| 161.40.2368.891.41.1503 | Standard 5 | 2.6875 in | - | - | - | - | - | - | - |
| 91.35.2012.991.41.1502 | Standard 5 | - | - | 223 mm | - | - | - | - | - |
| 91.30.1799.991.21.1502 | Standard 5 | - | - | 31 mm | - | - | - | - | - |
| 2 0245 | Rollix | 1.01 in | 5/8 in | 2 in | - | - | - | - | - |
| 11.40.2240.001.41.1502 | Standard 5 | 4.528 Inch | 115 Millimeter | - | 5.53 Inch | 140.462 Millimeter | - | - | - | Bearing | Triple Lip Nitrile Rubber |
| 32 0411 01 | Rollix | 100.000 mm | 60.30 mm | 180.0000 mm | - | - | - | - | - |
| 2 0422 | Rollix | 1-3/16 in | - | 1-11/16 in | - | - | - | - | - |
| 91.40.2395.990.11.1502 | Standard 5 | 90 mm | - | 100 mm | - | - | - | - | - |
| 2 052 Rollix Slewing Ring Bearings | operating temperature range:-30 to +120 &de; closure type:Open; assembly type:Cone & Cup; cone width:35 mm; flange type:Non-Flanged Cup; static load capacity:194000 N; maximum rpm:6900 RPM; cage material:Steel; cup width:27 mm; D:100 mm; series:332; dynamic load capacity:138000 N; standards met:DIN ISO 355/DIN; finish/coating:Uncoated; d:55 mm; |
| 162.45.2240.891.41.1503 Standard 5 Slewing Ring Bearings | D:12.0000 in; cup width:2.2500 in; fillet radius:1.5 mm; compatible cone:HH932132; single or double cup:Single Cup; Weight:8.7400 kg; manufacturer upc number:053893713823; |
| 8 0405 05 Rollix Slewing Ring Bearings | maximum rpm:14000 RPM; dynamic load capacity:2430 lbf; bearing width:2 mm; cage material:Steel; d:17 mm; thrust bearing type:Roller & Cage As; fillet radius:0.3 mm; compatible washer:AS1730, GS.81103 &#x; series:FNT; static load capacity:7820 lbf; D:30 mm; |
| 36 0411 01 Rollix Slewing Ring Bearings | d:65 mm; manufacturer upc number:087796266704; D:120 mm; cage material:Brass Cage; internal clearance:C3; bore type:Straight; B:31 mm; |
| 191.50.6300.990.41.1502 Standard 5 Slewing Ring Bearings | sleeve bearing type:Straight Bushing; additional details:Lead Free; standards met:RoHS; material specification:80; bearing material:Polyacetal; D:5/8 in; maximum v value:0.85 m/s SFPM; series:80BN; maximum p value:17.5 N/mm²; operating temperature range:-40 to 176 °F; maximum pv value:2.45 N/mm²; d:1/2 in; overall length:3/4 in; |
| 1 0181 02 Rollix Slewing Ring Bearings | static load capacity:111000 lbf; dynamic load capacity:105000 lbf, 60200 lb; cage material:Steel; inner ring width:3 in, 1-1/2 in,; finish/coating:Uncoated; manufacturer upc number:053893309224; d:5.0000 in; cone width:1.5000 in; operating temperature range:-65 to +250 &de; bearing material:Chrome Steel; series:48200; |
| 11.25.1800.000.11.1503 Standard 5 Slewing Ring Bearings | lip material:Labyrinth; manufacturer catalog number:29519-5539; Weight:0.21 lb; maximum shaft surface speed:4500 fpm; construction description:ISO-GARD® Flange; pressure tolerance:Ambient; D:2.3620 in; harmonization code:3926904590.US; width:0.6400 in; shaft diameter:1.5750 in; continuous temperature range:-22 to 400°F; typical application:Exceptional Bearing; misalignment tolerance:0.020 in; |
| 11.30.2031.601.41.1503 Standard 5 Slewing Ring Bearings | seal type:Labyrinth; expansion type:Expansion Bearing &#; overall height:5.0000 in; housing material:Cast Iron; mounting:Four-Bolt Base; locking device:Concentric Collar; lubrication type:Lubrication Fitting; housing construction:Solid Pillow Block; base width:3-1/4 in; series:400; standards met:ANSI/ABMA STD 1; radial dynamic load capacity:26400 lb; d:2.1875 in; bearing type:Spherical Roller; |
| 161.45.2240.891.41.1503 Standard 5 Slewing Ring Bearings | Category:Flange Block; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:4.54; Product Group:M06288; Number of Mounting Holes:4; Mounting Method:Concentric Collar; Housing Style:4 Bolt Round Flange Block; Rolling Element:Spherical Roller Bearing; Housing Material:Cast Iron; Expansion / Non-expansion:Non-expansion; Mounting Bolts:1/2 Inch; Relubricatable:Yes; Insert Part Number:B22432HL; Seals:Floating Labyrinth; |
| 39 0411 01 Rollix Slewing Ring Bearings | housing construction:Solid Pillow Block; seal type:Labyrinth; maximum rpm:1560 RPM; bore type:Round; base to bore centerline:3.7500 in; standards met:UL, AFBMA, AGMA, ASM; radial dynamic load capacity:65500 lb; radial static load capacity:81500 lb; mounting:Two-Bolt Base; bearing type:Spherical Roller; overall length:13.0000 in; B:4.02 in; housing material:Cast Iron; manufacturer catalog number:070357; |
8 0340 04 Rollix Slewing Ring Bearings Video
Wireflow Lineal Pendant Lamp - Vibia
The Wireflow 2D lamps are available in different versions with 2, 6, 8 and 10 LED versions. Designed by. Arik Levy. Arik Levy. Share ...
2020-New-Employee-Training-ASC-V2.pdf
GS 8 - 10 ... 0340. 0346. 0861. 1106. Career Path: Reference Appendix C, November 9, ... NH-04. Understanding AcqDemo Pay System Career Paths, Broadband.105 pages
Position Classification Flysheet for Program Management ...
This position classification flysheet updates the Program Management Series, 0340, and provides the series definition and titling instructions. In the General ...Missing: 04 | Must include: 04
DOD CIVILIAN ACQUISITION WORKFORCE PERSONNEL ...
Mar 8, 2019 — 8) AcqDemo Memorandum (AM) 14-04 – Nature of Action Code (NOAC (NOAC) 891, ... 0340. PROGRAM MANAGEMENT. 0341. ADMINISTRATIVE OFFICER.430 pages
OSP-0340 - HCAI
OSP-0340. Page 8 of 25. OSP-0340. Mohammad Aliaari. 06/04/2021 ... UUT-01a was bolted the wall fixture using (4) 3/8" SAE Grade 8 bolts between the unit ...
Department of Defense
Feb 14, 2011 — 8. Supervisory Probationary Periods. NAWCAD and NAWCWD will implement an extended supervisory probationary period. The probationary period for ...42 pages
Program Management - USAJOBS - Explore Opportunities
Program Management. Series 0340. 185 jobs.
Nationwide Standard Position Descriptions - USGS
All Nationwide Standard Position Descriptions include an appropriate OF-8 Position Description Cover Sheet for your ... Program Manager, GS-0340, GS-14.
Salary & Financial | IRS Careers
In addition to paying time-and-a-half for working more than 8 hours in a day, or 40 hours in a week, we'll also pay you the following premium rates:.