| No. | Brand | d | B | D | Da | da | Type | Noun | Seals |
| 28 0541 01 | Rollix | 10 mm | - | 18 mm | - | - | - | - | - |
| 11.35.2220.000.11.1503 | Standard 5 | 3/8 in | - | 3/4 in | - | - | - | - | - |
| 8 0220 05 | Rollix | 2.4375 in | 2-7/16 in | 130 mm | - | - | - | - | - |
| 161.36.1900.890.11.1503 | Standard 5 | 1.2500 in | - | 3.5000 in | - | - | - | - | - |
| 121.45.5300.990.41.1502 | Standard 5 | 4.2500 in | - | 6.2987 in | - | - | - | - | - |
| 91.50.2842.990.41.1502 | Standard 5 | - | - | 7.2772 in | - | - | - | - | - |
| 92.40.2003.990.11.1502 | Standard 5 | 12 mm | - | 18 mm | - | - | - | - | - |
| 1 0555 01 | Rollix | 7.0000 in | 0.5000 in | 8.0000 in | - | - | - | - | - |
| 92.40.2395.991.41.1502 | Standard 5 | 14 mm | - | - | - | - | - | - | - |
| 162.36.1900.890.11.1503 | Standard 5 | 3.438 Inch | 87.325 Millimeter | 3.938 Inch | 100.025 Millimeter | 3.661 Inch | 93 Millimeter | - | - | - | Bearing | Triple Lip Nitrile Rubber |
| 191.20.2000.990.41.1502 | Standard 5 | 12.85 mm | 10.31 mm | 23.81 mm | - | - | - | - | - |
| 161.45.2366.890.11.1503 | Standard 5 | 2.1250 in | - | 4.7244 in | - | - | - | - | - |
| 11.30.2235.000.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 21 0411 01 | Rollix | 12 mm | - | - | - | - | - | - | - |
| 12.50.3839.001.49.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 91.35.1802.991.41.1502 | Standard 5 | 17 mm | 81 mm | 63.5 mm | - | - | - | - | - |
| 121.50.5600.990.41.1502 | Standard 5 | 2.2500 in | 2-9/16 in | 7-13/32 in | - | - | - | - | - |
| 12.30.1995.000.11.1503 | Standard 5 | - | - | 2.8830 in | - | - | - | - | - |
| 1 0422 01 | Rollix | 35 mm | 17 mm | 72 mm | - | - | - | - | - |
| 11.25.1800.001.41.1503 | Standard 5 | 2-11/16 in | 11.2500 in | 6.7500 in | - | - | - | - | - |
| 28 0411 01 | Rollix | - | - | 2.8750 in | - | - | - | - | - |
| 191.40.3550.990.41.1502 | Standard 5 | 170 mm | 52 mm | 310 mm | - | - | - | - | - |
| 91.30.1799.991.21.1502 | Standard 5 | - | - | 31 mm | - | - | - | - | - |
| 192.40.3150.990.41.1502 Standard 5 Slewing Ring Bearings | cage material:Brass Cage; manufacturer upc number:087796304154; d:200 mm; D:280 mm; internal clearance:C0; bore type:Straight; B:60 mm; |
| 191.32.2500.990.41.1502 Standard 5 Slewing Ring Bearings | series:AWOR2; |
| 1 0342 Rollix Slewing Ring Bearings | housing material:Steel; d:3-7/16 in; radial static load capacity:90700 lb; finish/coating:Uncoated; seal type:Contact/Lip; series:400; locking device:Set Screw; lubrication type:Lubrication Hole; bearing type:Spherical Roller; housing width:3-7/16 in; D:6.194 in; inner ring width:4-3/8 in; expansion type:Non-Expansion Bearin; maximum rpm:1250 RPM; radial dynamic load capacity:51000 lb; |
| 29 0541 01 Rollix Slewing Ring Bearings | overall depth:1-1/16 in; overall length:3-9/16 in; housing material:Cast Iron; compatible frame number:NS210; slot width:1/4 in; lubrication type:Cannot Be Relubricat; B:3-1/8 in; series:205; slot spacing:2-5/8 in; finish/coating:Uncoated; expansion type:Non-Expansion Bearin; unit type:Top Angle; overall height:3-1/8 in; operating temperature range:+250 to +1; |
| 191.32.3550.990.41.1502 Standard 5 Slewing Ring Bearings | head width:.5000 in; axial static load capacity:900 lb; grade:Commercial; rod end type:Female Threaded with; series:CFF; ball width:.6250 in; shank thread length:1.0310 in; lubrication type:With Lubrication Fit; manufacturer catalog number:1590809000; length to ball center:2.1250 in; lubrication:Grease; radial static load capacity:9000 lb; housing material:Carbon Steel - corro; thread direction:Left Hand; |
| 162.45.2510.890.11.1503 Standard 5 Slewing Ring Bearings | maximum shaft surface speed:12000 fpm; misalignment tolerance:0.020 in; Weight:0.92 lb; construction description:Guardian® Flange; pressure tolerance:Ambient; shaft diameter:1.2600 in; harmonization code:8487900040.US; manufacturer catalog number:29602-2435; width:0.7000 in; continuous temperature range:-22 to 400°F; typical application:Exceptional Bearing; lip material:Labyrinth; D:2.2620 in; |
| 8 0270 04 Rollix Slewing Ring Bearings | base width:3.7300 in; series:QAP; bore type:Round; overall length:14.2500 in; Weight:59 lbs; housing material:Cast Steel; bearing type:Spherical Roller; housing construction:Solid Pillow Block; overall height:8.2600 in; lubrication type:Lubrication Fitting; expansion type:Non-Expansion Bearin; duty type:Heavy Duty; seal type:Triple-lip contactin; manufacturer upc number:883450265461; d:3.9375 in; bearing material:Bearing Steel; |
| 1 0422 01 Rollix Slewing Ring Bearings | bore type:Straight; ring separation:Separable Ring; D:72 mm; outer ring width:17 mm; closure type:Open; finish/coating:Uncoated; series:200; static load capacity:7040 lbs; B:17 mm; application:Electric Motors, Pri; internal clearance:C0; precision rating:Not Rated; operating temperature range:Maximum of +250; fillet radius:0.024 in; cage material:Polyamide; dynamic load capacity:7590 lb; number of rows:1; |
| 1 0181 02 Rollix Slewing Ring Bearings | static load capacity:111000 lbf; dynamic load capacity:105000 lbf, 60200 lb; cage material:Steel; inner ring width:3 in, 1-1/2 in,; finish/coating:Uncoated; manufacturer upc number:053893309224; d:5.0000 in; cone width:1.5000 in; operating temperature range:-65 to +250 &de; bearing material:Chrome Steel; series:48200; |
| 162.40.2000.891.41.1503 Standard 5 Slewing Ring Bearings | bearing type:Radial; D:42 mm; outer ring width:16 mm; closure type:Open; operating temperature range:-60 to +200 &de; inner ring material:Stainless Steel; standards met:ISO-12 240-1; radial dynamic load capacity:48000 N; misalignment angle:7 °; radial static load capacity:240000 N; d:25 mm; lubrication type:Requires Lubrication; outer ring material:Stainless Steel; inner ring width:20 mm; |
3 036 Rollix Slewing Ring Bearings Video
3-036-A Splicing Sleeve for Solid Copper Wire - Nicopress
Signal and Telecommunication splicing sleeves are designed to butt-splice the a range of solid wire types. Sleeves often develop 100% of the rated breaking ...Wire Type: Copper SolidLength: 3/4 InchWire Size: 22 AWG, 20 AWG, 19 AWGApplication: Signal
AMT-18C-3-036 - Encoder Accessories - CUI Devices
AMT Cable, 18 Conductor, Shielded, Twisted Pair, 24 AWG, Locking.Wire Type: Shielded Twisted PairConnector Type: 18 pin
CUI Devices AMT-18C-3-036 Cable Assembly Other ...
Buy AMT-18C-3-036 with fast, free shipping on qualifying orders. View datasheets, stock and pricing, or find other Cable Assembly Other.
AMT-18C-3-036 CUI Devices Accessories AMT CABLE, 18 ...
AMT-18C-3-036 inventory,CUI Devices,AMT-18C-3-036 Accessories Sensors, Transducers AMT CABLE, 18 CONDUCTOR, JST, SH bourns.zeanos.com.
AMT-18C-3-036 CUI Devices | Mouser
Specifications ; Connector End A Pin Count: 18 Position ; Connector End B: Terminal, Crimp ; Cable Length: 3 ft ; Wire Gauge - AWG: 24 AWG.
Snappy ADP 3 in. 26 ga 90 Degree Duct Elbow - 3-036
3 in. 26 ga 90 Degree Duct Elbow (3-036) at Ferguson. Nobody expects more from us than we do. ®
AMT-18C-3-036 CUI Devices | Sensors, Transducers ...
Order CUI Devices AMT-18C-3-036 (102-6652-ND) at DigiKey. Check stock and pricing, view product specifications, and order online.
Secced Soft Case with Wheels 3-036 B&H Photo Video
Secced 3-036 Overview. The Secced Soft Case with Wheels is a soft-shelled carrying case with two sturdy wheels and an accompanying handle to ...
AMT-18C-3-036 - Cable - Automation Direct
AMT-18C-3-036 - CUI Devices encoder cable, 18-pin connector to pigtail, shielded, twisted pair, 3ft cable length. For use with AMT13 and AMT33 encoders.